ISSN (0970-2083)

All submissions of the EM system will be redirected to **Online Manuscript Submission System**. Authors are requested to submit articles directly to **Online Manuscript Submission System** of respective journal.

Mining Department, Saint-Petersburg Mining University, Saint-Petersburg, 21 Line V.O., 2, Russia

**Received date: ** 06 May, 2017; **Accepted date: ** 08 May, 2017

**Visit for more related articles at**
Journal of Industrial Pollution Control

The article summarizes scientific and industrial research of blast fragmentation patterns in different mining and geological conditions. Particle size distribution in a bulk is one of the most important parameters for ore mining as it significantly affects further production process and profit return. Efforts to estimate effective blast design principles that could be applied in any geological and technical conditions are made. Three invariants are suggested as basis to determine drilling and blasting parameters for expected fragmentation results. Experimental blasts results are described and analysed to study the influence of charge parameters on particle size distribution. Obtained results could be used to design blasts on open pits to get pre-defined particle size distribution.

Drilling and blasting parameters, Energy distribution, Particle size distribution, Blast fragmentation, Determination method

Rock fragmentation quality differently affects the
economy and performance of core mining enterprise
processes. For example, expectancy decrease of
characteristic rock fragment size affects escalation
of drilling and blasting cost but leads to reduction
of loading and hauling cost. Mining experience
worldwide clearly shows that the maximum profit
corresponds to exact blast fragmentation distribution
(Sanchidrián, *et al*., 2014). This variation of blast
fragmentation particle size impact on economic
parameters actualizes the search of the optimum
blast design to minimize overall rock production cost.
So, a sustainable method of blast design parameters
(e.g., burden, borehole diameter, etc.) estimation is
needed. Blast fragmentation models are supposed
to be based on invariants: uniform input data, some
constants, laws or equations that do not change after
rock properties, loading time or size scale.

Based The first fragmentation invariant can be stated. Total blast and mechanical fragmentation and the native rock block size have a lognormal distribution and its variance is a structural invariant.

Three general assumptions about rock fragmentation are limiting laws of linear size, surface or weight distribution:

- lognormal, in case the size of a piece does not affect its fragmenting probability (Kolmogorov model) (Gorokhovski and Saveliev, 2003);

- gamma distribution, in case fragmenting probability shows a positive growth proportionally to any positive degree of the piece size (Kolmogorov- Filippov model) (Ghorbel and Huillet, 2007);

- no limiting law when fragmenting increases proportionally to a negative degree of the piece size.

Overall distribution of particle size varying from tens and hundreds of meters to millimeters and less obviously can be approximated by all of the described models in some intervals. However, economic performance of mining is highly dependent on quantity of rocks of a size which has the most influence on loading and hauling productivity. In this regard, the methods of particle size estimation at mining enterprises are oriented on grades between 0.1 m to 2 m. And within this range the lognormal distribution (Kolmogorov model) could be used, as mechanical properties are unlikely to vary from one particle size to another.

Experimental results analysis (Lu, 1997) has shown
that particle size distribution of destroyed rock mass
can be approximated by a lognormal function even in
a wide range of blasting design parameters in similar
rock mass conditions and with a constant variance.
Meantime, we have established (Vinogradov and
Tumasheva, 1975) that even in considerably different
mining conditions high fluctuation of particle size
expectation (e.g. x50) is not followed by significant
variance fluctuation. This is considered as a result of
averaging of elemental destruction events (molecular
bond breaking). Also, it explains almost identical
results of rock mass centuries-long loading and blast
fragmentation. **Fig. 1** shows similar particle size
distribution in conditions of “Kuznechnoe” open-pit
mine.

Conformity of logarithmic variance (~1.0) between drilling chips, blasted rock and natural block size shows that statistical analysis characterizes stochastic process of elemental destruction events causing molecular bond breaking. The experimental data confirms that logarithmic variance of lognormal distribution function is a structural fragmentation invariant on the level of statistical ensemble of rock blocks and pieces.

According to the above, the problem of regular or more uniform fragmentation by change of rock mass blast destruction parameters is almost unsolvable. Short range and random nature of logarithmic variance change for rock mass fragmentation allows getting more or less fragmentation ratio in terms of mean fragment particle size. However, more fragmentation uniformity usually leads to decrease of coarse particles content but increase in fine parts which doesn't affect much loading and hauling.

Second fragmentation invariant is related to blast energy distribution and can be stated. Energy absorbing capacity of rock mass volume is a variable and it depends on correlation between specific energy input and burden.

Second fragmentation invariant is related to blast energy distribution and can be stated. Energy absorbing capacity of rock mass volume is a variable and it depends on correlation between specific energy input and burden.

The main objectives of the research are:

1. Study of quantity related association between rock mass blast fragmentation, movement, seismic vibrations and burden/charge weight proportion.

2. Study of energy input needed for fragmentation and mass movement depending on specific charge and drilling pattern.

The third fragmentation invariant considers charge diameter. Specific charge/rock contact surface (charge surface/weight ratio) determines quantity of energy spent on fragmentation or blast efficiency.

The first bigger part of experiments was set at
Olenegorsk quarry. Further experiments were
conducted at Maleevsky mine and granite quarries
near Saint-Petersburg. Each experiment was a single
borehole blast varying depth, specific charge weight
and charge surface. The parameters measured are
the volume of blast crater, particle size distribution,
average velocity of rock and rock mass acceleration.
Working assumption to determine energy spent on
fragmentation is probabilistic-statistic hypothesis of
rock destruction (Shams, *et al*., 2015).

Experiments show the correlation between blast
fragmentation efficiency (ŋ/σ) and equivalent
burden using the fundamental equation of
probabilistic-statistic hypothesis of rock destruction
(**Fig. 2**):

(1)

Where ŋ is blast potential energy, output spent
on fragmentation (hereafter blasting efficiency or
b.e.); σ is strength of the rock, kg/m^{2}; q0 is specific
energy cost, kgm/m^{3}; W is burden, m; d is statistical
expectation of the particle size, m.

The diagrams for all cases (different blast series at Olenegorsk and Maleevsky mines) on interval including min and max b.e. can be approximated:

(2)

Where *η _{i}* is b.e. for specific K value;

The shown K value interval is the most suitable for mining blasts while K ≥ 1.1 describes confined blasts.

Therefore, knowing the values of ŋ_{0}, W_{0}, Q_{0}, the
equation allows determining b.e. for any blast for the
similar rocks and varying burden and charge weight.

The influence of explosives characteristics on blast
fragmentation efficiency can be estimated after
(Golovko, *et al*., 1874). Published results of singlecharge
blasts experiments allowed deducing the
efficiency of blast fragmentation for different
explosives. Comparing these with results obtained
at Olenegorsk quarry for ANFO-type explosive
showed perfect analogy.

For bulk blasts after United States Bureau of Mines (Siskind and Fumanti, 1974; Atchison and Tourney, 1959) the composition of distance between rows and holes in a row can be used as W2. This is characteristic value of an adequate accuracy for a mean burden of a blast hole pattern. Hence, the function (2) considering specific charge is:

(3)

where W_{0} is reference value of a blast hole pattern, m;
q_{0} is reference specific energy cost, kgm/m^{3}; Qi is new
blast hole pattern value, m; qi is new specific energy
cost, kgm/m^{3}.

The analysis of bulk blasts using (3) showed that even drastic change of energy costs (up to two times) and hole pattern (up to 1.5 times) kept good convergence of measured and expected blast results. The important point of the analysis is the flexibility of the function introduced for certain conditions (Olenegorsk quarry, ferruginous quartzite) and used for different mining conditions show a good convergence with real blasts. This allows considering it as invariant to rock mechanical properties.

The charge diameter is one of the most important parameters of blasting which significantly influences both fragmentation quality and drilling-and-blasting performance indicators.

According to similarity principle, the charge diameter influences the quantitative characterization of particle size distribution in a bulk and is determined by equal stress-and-strain parameters of rock mass with equal specific fragmentation energy costs. However, a number of researches (Cirel, 2005; Isheyskiy and Yakubovskiy, 2016) show that for constant specific energy of explosive fragmentation ratio is a linear function of charge diameter. It demonstrates that similar distribution of explosion energy does not provide similar rock mass fragmentation, and the total specific blast-formed surface of particles is more when charge diameter is less. This explains the increase of explosives specific consumption with big diameters comparing with small diameters of blast holes.

The contradiction between the similarity principle, according to which distance of equal actions of tension waves is pro rata to the charge linear sizes, and improvement of fragmentation with reduction of a charge diameter can be explained as change of the energy quantity transferred by a charge to the rock mass.

To clear this statement a number of experimental blasts was taken under the following conditions:

– constant volume and mechanical properties of rock mass, charge potential energy and height, density and type of explosive, as well as charge volume by varying diameter and construction;

– constant volume and mechanical properties of rock mass, charge potential energy and height, density and type of explosive, as well as charge volume by varying diameter and height.

The first series of experiments were set in conditions of Olenegorsk quarry with single charge blasts. Blasting results for different depth of charge are described by volume of blasting wedge and particle size distribution. Also, kinematic parameters of rock mass movement in strain wave were measured in charge vicinity.

Charge diameter in different blasts was 76, 105 mm and 132 mm and charge height, energy and explosive type (ANFO) remained constant. Charge weight was 1.6 kg. Charge height is kept constant by disposition of a concrete kernel in the center.

The main result of the experiment is correlation between rock mass velocity and acceleration and charge surface changes. These values were measured on same distances from the center of the charge, and normalized to real radius they describe the velocity and acceleration for solid charge. In this case increase of specific surface (and radius) of a charge with a constant weight and inert material in the center results in increase of blast seismic influence zone proportional to relative increase of specific charge volume.

Related b.e. values predicted using (2) for three sets
of blasts (**Fig. 3**) are proportional to charge diameter
to the power 4/3:

However, experimental conditions are taken to determine not the charge diameter influence but charge surface/weight ratio. So (2) can be transformed to:

(4)

Where D_{i} is new charge diameter, ρ_{i} is new charge
density.

The experimental blast series results showed that blast fragmentation efficiency was determined by outer part of explosive charge and the increment of the charge surface.

The second experimental blasts series was set on a
granite-gneiss quarry. The series included three sets
of single-charge blasts of 1.2 kg of ANFO at 1.2 m
depth and varying charge diameter of 64, 89 and 102
mm. Charge depth was equivalent to 1 m burden,
which showed maximum values of rock mass
velocity and acceleration. Kinematic parameters of
mass movement were measured using piezoelectric
accelerometers placed 1 meter from the charge, or for 64 mm charge, 30 radii length (30xR). Four
blasts were made for each charge diameter. Mean
rock mass velocity for each set is described at **Fig. 4**.
Seismic effect of the explosion, i.e., particle velocity
in seismo-blast wave is a function of contact surface
of charge and rock. Blast fragmentation efficiency
can be determined using (4).

Comparison between results for granite-gneiss and ferruginous quartzite demonstrates that dependences between rock mass movement parameters and specific charge surface are similar for charges of constant and varying height.

The analysis of bulk explosions results justifies the dependence (4) received experimentally for rocks with various mechanical properties.

The offered method of drilling and blasting parameters estimation on the set particle size distribution is based on above the specified invariants and represents the solution of the following equations system:

Which is substitution of (3) to (1).

Where d_{i} is particle size expectation, m; W_{0} is drill
pattern parameter, m; g_{0} is specific consumption
of explosives, kg/m^{3}; ŋ_{0} is blast efficiency; D0 is
used blast hole diameter, m; W_{i}, g_{i} is new design
parameters of drill pattern and explosives specific
consumption for D_{i} diameter; l is charge height, m; L
is bench height, m.

Cirel, S.V. 2005. Once again about influence of charge diameter on blast fragmentation particle size.

Ghorbel, M. and Huillet, T. 2007. Additional aspects of the non-conservative Kolmogorov-Filippov fragmentation model.

Golovko, G.S., Kozlovskij, B.V. and Mamashev, J.P. 1874. Research of aqueous explosives efficiency.

Gorokhovski, M.A. and Saveliev, V.L. 2003. Analyses of Kolmogorov’s model of breakup and its application into Lagrangian computation of liquid sprays under air-blast atomization.

Isheyskiy, V.A. and Yakubovskiy, M.M. 2016. Determination of strength reduction factor in blasted rocks versus the distance from the blast center.

Lu, P. 1997. The characterisation and analysis of in-situ and blasted block-size distributions and the blastability of rock masses [thesis]. University of London, London.

Sanchidrián, J.A., Ouchterlony, F., Segarra, P. and Moser, P. 2014. Size distribution functions for rock fragments.

Shams, S., Monjezi, M. and Majd, V.J. 2015. Application of fuzzy inference system for prediction of rock fragmentation induced by blasting.

Siskind, D.E. and Fumanti, R.R. 1974. Blast produced fractures in Lithonia granite.

Vinogradov, Y.I. and Tumasheva, T.A. 1975. Estimation of blast fragmentation.

Copyright © 2020 Research and Reviews, All Rights Reserved